After
the Grout Perfect Process is completed this is how to maintain
the floor in the following manner:
Always
vacuum your entire tile floor thoroughly to remove all the
loose dirt and dust before wet cleaning outlined in the
following paragraphs.
Neutral
cleaners are all that is necessary to effectively clean
tile and now that your grout has been sealed with Grout
Perfect Colour Seal the same is true. We also recommend
buying an inexpensive concentrated window cleaner, dilute
1/2 cup with about 4 Litres of warm water.
Apply
cleaner to floor generously with a mop, allow to stand on
floor 3 to 4 minutes (no scrubbing), this will allow cleaner
to emulsify and loosen any dirt and oils on your floor.
Take
a common type mop covered with a clean dry terry cloth towel
rather than the cloths that may actually come with the mop
and dry the floor changing the terry cloth towel often.
Please
keep in mind dirt does not evaporate! The
final step is to dry the grout lines with a clean dry terry
cloth towel. Liquids settle in the grout lines because they
are slightly lower. To prevent the now dirty cleaner that
you are drying off your tile from drying in the grout lines
and leaving a dirty residue on the Grout Perfect Colour Seal
the final step must be to dry the grout line to complete the
floor cleaning process. This will keep your floor looking
as it did when your Grout Perfect Technicians completed the
process to your floor.
Grout
Perfect® Unit 1, 14 Christine Place Capalaba, Tel: 0403
33 26 46, Fax: (07) 3823 2407
email: info@groutperfect.net.au
